Hi
Ran into the same problem and tried all the "recommended" fixes. Was 100% sure that the install was ok but it was just something with the boot setup and nothing recommended worked...
After doing a bunch of testing and reading put a combination of suggestions together and this is what worked for me.
You will need a Windows 7 x64 DVD.
1. Boot from your Windows Server 2008 R2 x64 DVD.
2. Repair
3. Command Prompt
Note: I only had one drive and that drive was set for C: as the boot so the setup was fairly basic... if your setup is more complex you may want to consider this a bit more... but it should still work.
4. rename c:\boot\BCD bcd.old : this will backup your bcd file just in case you want it.
5. Delete c:\boot\bcd
6. Restart your computer
7. Remove your WS2008R2 DVD and install the W7x64 DVD.
8. Boot from the DVD and do a repair.
9. It will offer to repair automatically accept.
10. Reboot and this is the "trick" boot the DVD again and do a repair. Keep doing this process until it does not find anything wrong.
11. Your server should boot again
وأي سؤال أنا جهز
هيدي لحل المشكلة في ويندوزسيرفر
لتوصل معي على الفيس بوك بإمكان اضافتي على الحساب التالي :
https://www.facebook.com/Microsoft.Engineer
نصائح واستشارات امنية في مجال امن المعلومات والإتصالات
كبار استشاري امن المعلومات في شركة مايكروسوفت
الذين يشاهدون الموضوع الآن: 3 (0 من الأعضاء و 3 زائر)
مواقع النشر (المفضلة)